Chery QQ - Removal and Installation of High-Mounted Stop Lamp

Chery QQ Service Manual
Installation:
——
—— into top install hole in correct
ping screw by
. Removal and installation of high-mounted stop lamp
emoval:
trim out the wiper motor.
Installation:
—Connect the harness connector;
—— ody by bolt;
rim board, close the luggage compartment lid;
Connect the harness connector;
put the lamp
position and direction, tighten the tap
screwdriver, then press the shade of ceiling light in
by your hands.
9
R
——Open the luggage compartment lid, remove the
board, take
——Loose two fixing screw then pull out the shade
downwards.
——Loose three bolt the take out the high-mounted
stop lamp.
——Pull out the connector.
—
Fix the lamp b
——Install the luggage compartment t
- 48 -