Chery QQ - Guide to Trouble-Shooting; The Toe-In and Camber Angle of the Rear Wheels Cannot be Adjusted

Chery QQ Service Manual Chassis System
IV. The toe-in and camber angle of the rear wheels cannot be adjusted.
Check the camber angle and toe-in of the rear wheels. If they fail to be in the specified
limits, check to see if there are any deformed parts. Replace the defective parts.
Section Four: Guide to Trouble-Shooting
Problem Possible cause Countermeasures
Excessive tear-and-wear
or unevenly distributed
tears and wears of tires
As indicated later
Tears and wears of tires
ahead of scheduled
operational life
Incorrect tire pressure
Incorrect wheel positioning
parameters
Adjustment
Adjustment
Tire noises
Incorrect tire air pressure
Tears and wears of tire
Adjustment
Check, adjustment,
replacement
Road surface noises or
vibration of car body
Insufficient tire pressure
Imbalance of tires
Deformed rim section or tire
Unevenly distributed tears
and wears of tire
Adjustment
Adjustment
Repair or replacement
Check, adjustment,
replacement
- 67 -
Chery Automobile Co., Ltd