Chery QQ - Install Rear Window Glass

Chery QQ Service Manual
Install rear window glass
1. Fixing rear window inlaid strips
Put inlaid strips on glass periphery and
fix the strips by hand
Note：Rear window glass must be removed
before fixing inlaid strips
2. Clean and finish the joint surface
of car body
Cut roughness off bonding agent sticking to
car body with knife
Note：Keep bonding agent on car body
as much as possible
Clean the cutting surface of bonding
agent with a rag soaked in cleaning liquid
Note：Even though all of bonding agent is completely removed,
car body must be cleaned
3.Remove block stop：
Remove block stop by knife
4. Clean removed glass
Remove the bonding agent stuck on glass
with scraper
Remove block stop by knife
Clean glass with cleaning liquid
Attention：Do not touch glass after cleaning
bonding agent
Block stop
- 266 – Chery Automobile Co.,Ltd