Chery QQ Service Manual
- 267 – Chery Automobile Co.,Ltd
5. Position glass
Put glass in right place
Make reference marks on glass and car body
Remove glass
6. Clean the joint surface of glass
Clean the black dirt with clean liquid
on the joint surface of glass periphery
Attention：Do not touch glass surface
after cleaning
Coating a layer of base paint M
on the joint surface of car body
Brush a layer of base paint M
onto the joint surface of car body
Attention：Leave base coating layer dry
for 3 minutes at least
No coating on bonding agent
Never reserve unsealed base paint M for later use
7. Coat a layer of base paint G on the joint
surface of glass
Coat a layer of base paint G with brush or
sponge on glass periphery and joint surface
Clear base paint with a clean rag before drying
Attention：Leave base paint layer dry for
3 minutes at least
No coating on bonding agent
base paint M
base paint M
bonding agent
base paint M
base paint G
To Next Page
Loading...
