Chery QQ Service Manual Chassis System
Chery Automobile Co., Ltd
87
2) Remove the joining bolt for the horizontal
stabilizingrod and t he rear bridge.
3) Remove the dampener and the spiral spring.
4) Remove the rear bridge assembly.
Steps of installation:
1. Do the installation by referring to the steps of
dismounting.
2. Points of attention:
①In the screw tightening process, the fastening
bolts controlled by torque + corner tightening
submission limits should be replaced after each
action of loosening.
② The screws should be tightened to the
specified torques after the installation.
To Next Page
Loading...
