al
(3)Be careful of sputtering iron scrap when drilling the hole.
(4)Air in the cylinder is colorless, smell-less, and nontoxic
(5)Deal with the support carefully. Do not drop paint or oil on it.
(6)When the support fully extrudes, do not turn the piston rod or cylinder.
3. Install the trunk door support
(1)Apply adhesive agent on the bolts.
(2)Install the trunk door support.
Torque: 22 N.m(225 kg-cm, 16 pound-foot).
- 231 –Chery Automobile Co.,Ltd
To Next Page
Loading...
