Cisco 10000 Series User Manual

2-2
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
Chapter 2 Classifying Traffic
Traffic Classification Using Class Maps
Feature History for Class Maps
System Limits for Class Maps
Table 2-1 lists the system limits for class maps on the Cisco 10000 series router. In the table, the number
of class maps per system and the number of classes per policy map include the class-default class.
Cisco IOS Release Description Required PRE
Release 12.0(17)SL The class map feature was introduced on the PRE1. PRE1
Release 12.2(15)BX This feature was introduced on the PRE2. PRE2
Release 12.2(28)SB This feature was integrated in Cisco IOS
Release
12.2(28)SB for the PRE2.
PRE2
Release 12.2(31)SB2 This feature was integrated in Cisco IOS
Release
12.2(31)SB2 for the PRE3.
Enhancements to the modular quality of service CLI (MQC)
allow you to classify packets on the L2TP access
concentrator (LAC) based upon the IP type of service (ToS)
bits in an embedded IP packet. The classification is used to
police ingress traffic according to the differentiated service
code point (DSCP) value.
PRE3
Release 12.2(33)SB This feature was enhanced to support matching on the Frame
Relay Discard Eligibility (DE) bit.
PRE2, PRE3,
PRE4
Ta b l e 2-1 System Limits for Class Maps
Processor Cisco IOS Release
Number of Class
Maps per System
Number of Match
Statements per
Class Map
Number of Classes
per Policy Map
PRE1 All Releases earlier than
Release 12.0(17)SL
256 16 16
Release 12.0(17)SL
and later releases
256 16 256
Release 12.0(25)SX
and later releases
256 16 32
PRE2 Release 12.2(15)BX
and later releases
262,000 16 64
Release 12.3(7)XI
and later releases
262,000 16 127

Cisco 10000 Series Specifications

General

Brand	Cisco
Model	10000 Series
Category	Network Router
Language	English