Cisco 10000 Series

3-22
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
Chapter 3 Configuring QoS Policy Actions and Rules
Verifying QoS Policy Configurations
Verification Example for Service Policies
Example 3-3 shows the information displayed when you enter the show policy-map interface
command. In the example output, random early detection (RED) drop statistics display for each IP
precedence.
Example 3-3 show policy-map interface Command
Router# show policy-map interface atm 7/0/0.1
ATM7/0/0.1
Service-policy output: wred_1 (21036)
Class-map: prec_0_0 (match-all) (21037/2)
1445 packets, 1502800 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: access-group 100 (21038)
Output queue: 0/64; 1445/1502800 packets/bytes output, 0 drops
Bandwidth: 75 kbps (Weight 50)
Random-detect (precedence-based):
Exponential weight: 3 (1/8)
Current average queue length: 0 packets
----------------------------------------
Min Max Prob Rand-Drops Tail-Drops
0 16 32 1/1 0 0
1 18 32 1/10 0 0
2 20 32 1/10 0 0
3 22 32 1/10 0 0
4 24 32 1/10 0 0
5 26 32 1/10 0 0
6 28 32 1/10 0 0
7 30 32 1/10 0 0
Class-map: prec_0_1 (match-all) (21041/3)
1417 packets, 1473680 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: access-group 101 (21042)
Output queue: 0/64; 1417/1473680 packets/bytes output, 0 drops
Bandwidth: 73 kbps (Weight 49)
Random-detect (precedence-based):
Exponential weight: 3 (1/8)
Current average queue length: 0 packets
----------------------------------------
Min Max Prob Rand-Drops Tail-Drops
016321/1 0 0
1 18 32 1/10 0 0
2 20 32 1/10 0 0
3 22 32 1/10 0 0
4 24 32 1/10 0 0
5 26 32 1/10 0 0
6 28 32 1/10 0 0
7 30 32 1/10 0 0
Class-map: class-default (match-any) (21045/0)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any (21046)
0 packets, 0 bytes
5 minute rate 0 bps
Output queue: 0/32; 0/0 packets/bytes output, 0 drops