13-29
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
Chapter 13 Defining QoS for Multiple Policy Levels
Verifying the Configuration of Hierarchical Policies
Verification Examples for Hierarchical Policies
Example 13-13 shows sample output from the show class-map, show policy-map, show policy-map
interface, and show running-config interface commands for the hierarchical input policing policy
configured in
Example 13-12.
Example 13-13 Verifying a Hierarchical Input Policing Policy
Router# show class-map
Class Map match-any class-default (id 0)
Match any
Class Map match-any click (id 3)
Match ip precedence 2
Router# show policy-map
Policy Map policy2
Class click
police 200000 2000 pir 400000 3000 conform-action set-dscp-transmit 59 exceed-action
set-dscp-transmit 60 violate-action drop
Policy Map parentbps1
Class class-default
police 128000 2000 pir 256000 4000 conform-action transmit exceed-action transmit
violate-action drop
service-policy policy2
Router# show policy-map interface atm 5/0/0.1
ATM5/0/0.1
Service-policy input: Parentbps1
Class-map: class-default (match-any)
16080 packets, 2251200 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any
0 packets, 0 bytes
5 minute rate 0 bps
Output queue: 0/64; 0/0 packets/bytes output, 0/0 drops
Police:
128000 bps, 2000 limit, 256000 pir, 4000 extended limit
conformed 6870 packets, 961800 bytes; action: transmit
exceeded 6871 packets, 961940 bytes; action: transmit
violated 2339 packets, 327460 bytes; action: drop
Service-policy : policy2
Class-map: click (match-any)
16080 packets, 2251200 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: ip precedence 2
16080 packets, 2251200 bytes
5 minute rate 0 bps
Police:
200000 bps, 2000 limit, 400000 pir, 3000 extended limit
conformed 10727 packets, 1501780 bytes; action: set-dscp-transmit 59
exceeded 5353 packets, 749420 bytes; action: set-dscp-transmit 60
violated 0 packets, 0 bytes; action: drop
To Next Page
Loading...
Need help?
General
