Cisco 10000 Series User Manual

16-68
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
Chapter 16 Fragmenting and Interleaving Real-Time and Nonreal-Time Packets
Verifying and Monitoring Link Fragmentation and Interleaving
217196 packets, 14334936 bytes
30 second offered rate 264000 bps, drop rate 0 bps
Match: ip precedence 5
Output queue: 0/128; 217688/14367408 packets/bytes output, 0/0 drops
Absolute priority
Police:
512000 bps, 9216 limit, 12000 extended limit
conformed 214828 packets, 14178648 bytes; action: transmit
exceeded 0 packets, 0 bytes; action: set-prec-transmit 3
violated 0 packets, 0 bytes; action: drop
Class-map: class-default (match-any)
34314 packets, 2264904 bytes
30 second offered rate 0 bps, drop rate 0 bps
Match: any
Output queue: 0/128; 33823/2232498 packets/bytes output, 0/0 drops
Bandwidth : 46 kbps (Weight 3)
Verification Examples for FRF.12 Fragmentation
Example 16-24 shows sample output from the show frame-relay fragment command. In this example,
the command does not specify a specific interface or DLCI. Therefore, the output displays a summary
of each subinterface and DLCI configured for fragmentation.
Example 16-24 show frame-relay fragment Command Sample Output—All Subinterfaces and DLCIs
Router# show frame-relay fragment
interfacedlcifrag-typesizein-fragout-fragdropped-frag
se5/0/0/1:0.117end-to-end300000
se5/0/0/1:0.118end-to-end300000
Example 16-25 shows sample output from the show frame-relay fragment command when a specific
interface is specified. The output displays fragmentation information for only the specified subinterface
and DLCI (serial subinterface 3/0/0.1/1:0.1, DLCI 109).
Example 16-25 show frame-relay fragment Command Sample Output—Specific Subinterface and DLCI
Router# show frame-relay fragment interface serial 3/0/0.1/1:0.1 109
fragment size 300 fragment type end-to-end
in fragmented pkts 0 out fragmented pkts 1320
in fragmented bytes 0 out fragmented bytes 331760
in un-fragmented pkts 0 out un-fragmented pkts 0
in un-fragmented bytes 0 out un-fragmented bytes 0
in assembled pkts 0 out pre-fragmented pkts 0
in assembled bytes 0 out pre-fragmented bytes 0
in dropped reassembling pkts 0 out dropped fragmenting pkts 0
in DE fragmented pkts 0 out DE fragmented pkts 0
in DE un-fragmented pkts 0 out DE un-fragmented pkts 0
in timeouts 0
in out-of-sequence fragments 0
in fragments with unexpected B bit set 0
in fragments with skipped sequence

Cisco 10000 Series Specifications

General

Brand	Cisco
Model	10000 Series
Category	Network Router
Language	English