Cisco 10000 Series User Manual

19-7
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
Chapter 19 Configuring Quality of Service for PVC Bundles
ATM PVC Selection
bundle Command History
Usage Guidelines for the bundle Command
In the bundle configuration mode you can configure the characteristics and attributes of the bundle and
its members, such as the encapsulation type for all virtual circuits (VCs) in the bundle, the bundle
management parameters, the service type, and so on. Attributes and parameters you configure in bundle
configuration mode are applied to all bundle members.
VCs in a VC bundle are subject to the following configuration inheritance guidelines (listed in order of
next highest precedence):
• VC configuration in bundle-vc mode
• Bundle configuration in bundle mode
• Subinterface configuration in subinterface mode
To display the status of bundles, use the show atm bundle and show atm bundle statistics commands.
class-bundle Command
To configure a virtual circuit (VC) bundle with the bundle-level commands contained in the specified
VC class, use the class-bundle command in bundle configuration mode. To remove the VC class
parameters from a VC bundle, use the no form of the command.
class-bundle vc-class-name
no class-bundle vc-class-name
Syntax Description
class-bundle Command History
Defaults
No VC class is assigned to the VC bundle.
Usage Guidelines for the class-bundle Command
To use this command, you must first enter the bundle command to create the bundle and enter bundle
configuration mode.
Use this command to assign a previously defined set of parameters (defined in a VC class) to an ATM
VC bundle. Parameters set through bundle-level commands that are contained in a VC class are applied
to the bundle and its VC members.
Cisco IOS Release Description
Release 12.0(26)S This command was introduced on the PRE1.
vc-class-name Name of the VC class that you are assigning to your VC bundle.
Cisco IOS Release Description
Release 12.0(26)S This command was introduced on the PRE1.

Cisco 10000 Series Specifications

General

Brand	Cisco
Model	10000 Series
Category	Network Router
Language	English