Cisco 10000 Series User Manual

14-20
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
Chapter 14 Simultaneous Policy Maps
Verification Examples for Traffic Policing
Displaying Simultaneous Policy Map Information for Interfaces
The following example shows sample output from the show pxf statistics qos policy-map interface
command. The output shows policy map information for the specified Gigabit Ethernet
subinterface
6/0/0.2, which is the inherited policy of the sessions that use the subinterface. The output
also shows the policy maps owned by the sessions traversing the subinterface.
Router# show pxf statistics qos policy-map interface gigabitethernet 6/0/0.2
Simultaneous Policymap Info for GigabitEthernet6/0/0.2 -
Input Policy owned by GigabitEthernet6/0/0.2 [VCCI 2524] - 'parent1':
Class Pkts Bytes Pkts Pkts Pkts
Matched Matched Conformed Exceeded Violated
---------------- ----------- ------------ --------------- ----------- -----------
prec5 1000 66000 0 0 0
class-default 0 0 0 0 0
Input Policy owned by Virtual-Access3.4 [VCCI 3241] - ''prec-only”:
Class Pkts Bytes Pkts Pkts Pkts
Matched Matched Conformed Exceeded Violated
---------------- ----------- ------------ --------------- ----------- -----------
prec5 500 33000 0 0 0
prec3 0 0 0 0 0
prec2 0 0 0 0 0
class-default 0 0 0 0 0
Input Policy owned by Virtual-Access3.3 [VCCI 3240] - 'prec-only':
Class Pkts Bytes Pkts Pkts Pkts
Matched Matched Conformed Exceeded Violated
---------------- ----------- ------------ --------------- ----------- -----------
prec5 500 33000 0 0 0
prec3 0 0 0 0 0
prec2 0 0 0 0 0
class-default 0 0 0 0 0

Cisco 10000 Series Specifications

General

Brand	Cisco
Model	10000 Series
Category	Network Router
Language	English