Cisco 10000 Series User Manual

16-38
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
Chapter 16 Fragmenting and Interleaving Real-Time and Nonreal-Time Packets
FRF.12 Fragmentation
Feature History for FRF.12 Fragmentation
FRF.12 over Multilink Frame Relay
To remove and re-attach service policies from the FRF.12 over Multilink Frame Relay configuration
when traffic is running, use
Example 16-5. In Example 16-5, you remove the map-class, and then remove
the service policy.
Example 16-5 Remove the Map-Class Before Removing the Service Policy
int mfr2001.1
no frame-relay class mfr
no service-policy out mfr1
int mfr2001.1
service-policy out mfr1
frame-relay class mfr
When traffic is stopped, you can remove and re-attach service policies using Example 16-6 and
Example 16-7.
Example 16-6 Removing and Re-attaching the Service Policy
int mfr2001.1
no service-policy out mfr1
int mfr2001.1
service-policy out mfr1
Example 16-7 Remove the Service Policy Before Removing the Map-Class.
int mfr2001.1
no service-policy out mfr1
no frame-relay class mfr
int mfr2001.1
frame-relay class mfr
service-policy out mfr1
Cisco IOS Release Description Required PRE
Release 12.0(23)SX The PVC-based FRF.12 Fragmentation feature was
introduced on the router.
PRE1
Release 12.0(27)S This feature was enhanced to allow interface-based
FRF.12 fragmentation.
PRE1
Release 12.2(27)SBB This feature was introduced on the PRE2 to allow
PVC-based and interface-based FRF.12 fragmentation
only.
PRE2
Release 12.2(31)SB2 This feature was introduced on the PRE3. PRE3

Cisco 10000 Series Specifications

General

Brand	Cisco
Model	10000 Series
Category	Network Router
Language	English