Cisco 10000 Series User Manual

1-13
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
Chapter 1 Quality of Service Overview
QoS Features, Commands, and Changes
Dynamic Bandwidth Selection Feature
Cisco IOS Release: Release 12.2(16)BX
Description: The Dynamic Bandwidth Selection (DBS) feature was introduced on the PRE2 to
dynamically change ATM traffic shaping parameters based on a subscriber’s RADIUS profile. This
feature is also known as Per User QoS Using AAA Policy Name.
Cisco IOS Release: Release 12.2(28)SB
Description: This feature was integrated in Cisco IOS Release 12.2(28)SB.
Attaching QoS Service Policies
Documentation Reference: Chapter 4, “Attaching Service Policies”
• service-policy Command, page 1-13
• Attaching ATM QoS Service Policies, page 1-14
• Attaching Frame Relay QoS Service Policies, page 1-14
• Attaching LAC QoS Service Policies, page 1-15
• Attaching Virtual LAN QoS Service Policies, page 1-15
• Attaching Virtual Access Interface QoS Service Policies, page 1-15
service-policy Command
Cisco IOS Release: Release 12.0(17)SL
Description: The service-policy command was introduced on the PRE1 to attach a policy map that the
router can use to apply QoS services to inbound and outbound packets.
Cisco IOS Release: Release 12.2(15)BX
Description: This command was introduced on the PRE2.
Cisco IOS Release: Release 12.3(7)XI2
Description: This command was enhanced on the PRE2 to allow you to attach a policy map to a range
of PVCs, and to a specific PVC within the PVC range.
Cisco IOS Release: Release 12.2(28)SB
Description: This command was integrated in Cisco IOS Release 12.2(28)SB.
Cisco IOS Release: Release 12.2(31)SB2
Description: This command was introduced on the PRE3.

Cisco 10000 Series Specifications

General

Brand	Cisco
Model	10000 Series
Category	Network Router
Language	English