Cisco 10000 Series User Manual

1-55
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
Chapter 1 Quality of Service Overview
QoS Features, Commands, and Changes
Qos Policy Propagation through the Border Gateway Protocol
Documentation Reference: Appendix B, “QoS Policy Propagation Through the Border Gateway
Protocol”
Cisco IOS Release: Release 12.0(9)SL
Description: The QoS policy propagation through the Border Gateway Protocol (QPPB) feature was
introduced on the PRE1 to enable packet classification based on a Border Gateway Protocol (BGP)
prefix, BGP community list, and BGP autonomous system (AS) paths.
Cisco IOS Release: Release 12.2(16)BX
Description: This feature was introduced on the PRE2.
Cisco IOS Release: Release 12.2(28)SB
Description: This feature was integrated in Cisco IOS Release 12.2(28)SB.
Shaping PPPoE Over VLAN Sessions Using RADIUS
Documentation Reference: Chapter 17, “Configuring Dynamic Subscriber Services”
• Per Session Queuing and Shaping for PPPoE Over VLAN Support Using RADIUS Feature,
page 1-55
Per Session Queuing and Shaping for PPPoE Over VLAN Support Using RADIUS Feature
Cisco IOS Release: Release 12.3(7)XI7
Description: The Per Session Queuing and Shaping for PPPoE over VLAN Support Using RADIUS
feature was introduced on the PRE2 to enable dynamic queuing and shaping policies on PPPoEoVLAN
sessions.
Cisco IOS Release: Release 12.2(31)SB5
Description: This feature was integrated in Cisco IOS Release 12.2(31)SB5 for the PRE2.
Shaping Traffic
Documentation Reference: Chapter 9, “Shaping Traffic”
• atm pvp Command, page 1-56
• pvc Command, page 1-56
• shape Command, page 1-56
• shape percent Command, page 1-57
• vbr-nrt Command, page 1-57
• ATM VC/VP Shaping Feature, page 1-57
• Class-Based Traffic Shaping Feature, page 1-58
• Frame Relay Traffic Shaping Feature, page 1-58

Cisco 10000 Series Specifications

General

Brand	Cisco
Model	10000 Series
Category	Network Router
Language	English