Cisco 10000 Series User Manual

xxxv
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
About This Guide
This guide provides information about the Quality of Service (QoS) features supported on the
Cisco
10000 series router and describes how to configure them.
Guide Revision History
Description
Added the following new and modified features:
• MLP at LNS with H-QoS & ATM Overgead Accounting—See the “MLP on LNS with HQoS and
ATM Overhead Accounting” section on page 10-3
Description
Added the following new and modified features:
• ATM CLP-Based WRED—See the “Controlling Congestion Using Weighted Random Early
Detection” section on page 11-11.
• ATM Overhead Accounting—See the “ATM Overhead Accounting” section on page 2.
• ATM VP Average Traffic Rate—See the ATM VP Average Traffic Rate, Release 12.2(33)SB feature
guide.
• AToM Class-Based Match FR DE—Chapter 2, “Classifying Traffic”.
• AToM Set ATM CLP Bit Using a Policer—See the “AToM Set ATM CLP Bit Using a Policer”
section on page 6-13.
• AToM Set Frame Relay DE as Police Action—See the “AToM Set FR DE as Police Action” section
on page 6-14.
• Class-Based Frame Relay DE Bit Matching and Marking—See Chapter 2, “Classifying Traffic” and
the “Class-Based Frame Relay DE Bit Marking” section on page 7-17.
Cisco IOS Release Part Number Publication Date
Release 12.2(33)SB2 OL-7433-08 September, 2008
Cisco IOS Release Part Number Publication Date
Release 12.2(33)SB OL-7433-06 March, 2008

Cisco 10000 Series Specifications

General

Brand	Cisco
Model	10000 Series
Category	Network Router
Language	English