Cisco 10000 Series User Manual

Contents
xxxiv
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
Subinterface Shaping Using HQF 22-4
IP and PPP Session Shaping Using HQF 22-5
MQC Hierarchical Queuing with 3-Level Scheduler 22-5
Feature History for MQC Hierarchical Queuing with 3-Level Scheduler 22-6
Prerequisites for MQC Hierarchical Queuing with 3-Level Scheduler 22-6
Restrictions for MQC Hierarchical Queuing with 3-Level Scheduler 22-6
Scheduling Hierarchy 22-6
Priority Service and Latency 22-7
Latency Requirements 22-7
Priority Propagation with Imposed Burstiness 22-7
Configuring MQC Hierarchical Queuing with 3-Level Scheduler 22-8
Configuration Examples for MQC Hierarchical Queuing with 3-Level Scheduler 22-8
Bandwidth Allocation—Policy Attached to an Interface: Example 22-8
Tuning the Bandwidth-Remaining Ratio: Example 22-9
4-Level Scheduler 22-10
Feature History for 4-Level Scheduler 22-11
Related Documentation 22-12
APPENDIX A Configuring Frame Relay QoS Using Frame Relay Legacy Commands A-1
Creating a Map Class A-1
Enabling Weighted Fair Queuing on the Interface A-2
Specifying a DLCI Queue Weight A-2
Specifying Tail Drop A-3
Enabling RED Drop A-3
Configuring Frame Relay IP RTP Priority A-4
Configuring Frame Relay Traffic Shaping A-5
APPENDIX B QoS Policy Propagation Through the Border Gateway Protocol B-1
QPPB Configuration Example B-1
Related Documentation B-4
G LOSSARY
I NDEX

Cisco 10000 Series Specifications

General

Brand	Cisco
Model	10000 Series
Category	Network Router
Language	English