Cisco 10000 Series User Manual

17-66
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
Chapter 17 Configuring Dynamic Subscriber Services
Related Documentation
Router# show policy-map pm_hier2_child_0_2
Policy Map pm_hier2_child_0_2
Class cm_0
priority level 1
police percent 5 2 ms 0 ms conform-action transmit exceed-action drop
violate-action drop
queue-limit 77 packets
Class cm_1
Average Rate Traffic Shaping
cir 80%
bandwidth remaining ratio 80
Class class-default
Average Rate Traffic Shaping
cir 50%
bandwidth remaining ratio 20
Related Documentation
This section provides hyperlinks to additional Cisco documentation for the features discussed in this
chapter. To display the documentation, click the document title or a section of the document highlighted
in blue. When appropriate, paths to applicable sections are listed below the documentation title.
Feature Related Documentation
Pull and push functionality Define Interface Policy-Map AV Pairs AAA feature module,
Release
12.2(28)SB
Dynamic bandwidth selection Cisco IOS Wide-Area Networking Configuration Guide,
Release
12.3
Part 2: Broadband Access > Configuring Broadband Access:
PPP and Routed Bridge Encapsulation > Dynamic Subscriber
Bandwidth Selection
Dynamic Bandwidth Selection, Release 12.2(13)T and 12.2SB
feature module
RADIUS Cisco IOS Security Configuration Guide, Release 12.3
Part 2: Security Server Protocols > Configuring RADIUS

Cisco 10000 Series Specifications

General

Brand	Cisco
Model	10000 Series
Category	Network Router
Language	English