Cisco 10000 Series User Manual

xli
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
About This Guide
Chapter 10 Overhead Accounting Describes the overhead accounting features supported on the
router.
Chapter 11 Managing Packet Queue Congestion Describes the mechanisms used to control packet queue
congestion.
Chapter 12 Sharing Bandwidth Fairly During
Congestion
Describes the Class-based Weighted Fair Queuing (CBWFQ)
feature and explains how to configure it.
Chapter 13 Defining QoS for Multiple Policy Levels Describes the types of hierarchical policies supported and how
to configure them.
Chapter 14 Simultaneous Policy Maps Describes how to simultaneously configure policy maps on
sessions and interfaces.
Chapter 15 Oversubscribing Physical and Virtual
Links
Describes interface, virtual circuit, and virtual LAN (VLAN)
oversubscription and how to configure it. Also describes VC
weighting.
Chapter 16 Fragmenting and Interleaving Real-Time
and Nonreal-Time Packets
Describes fragmentation and interleaving on the router and how
to configure it.
Chapter 17 Configuring Dynamic Subscriber
Services
Describes how to use the following features:
• Dynamic Bandwidth Selection (DBS) feature—Apply
traffic shaping parameters using RADIUS profiles
• Define Interface Policy-Map AV Pairs AAA
feature—Apply QoS parameters dynamically to sessions
• DBS Extension—VC Weight and Watermarks—Modify
existing VC weight and watermark values without tearing
down and recreating the VC
• Per Session Queuing and Shaping for PPPoE Over VLANs
Using RADIUS feature—Dynamically apply queuing and
shaping policies to PPPoE over VLAN sessions
• Per Session Shaping and Queuing on LNS—Shape or queue
the traffic from an Internet service provider (ISP) to an ISP
subscriber over a Layer 2 Tunneling Protocol (L2TP)
Network Server (LNS).
• PPP Session Queuing on ATM Virtual Circuits—Shape and
queue PPP over ATM (PPPoA) and PPP over Ethernet over
ATM (PPPoEoA) sessions to a user specified rate.
Chapter 18 Regulating Subscriber Traffic Describes subscriber-based traffic regulating and shaping
features.
Chapter 19 Configuring Quality of Service for PVC
Bundles
Describes PVC bundles and QoS-based PVC selection over
ATM and Frame Relay PVCs.
Chapter 20 Configuring Quality of Service for MPLS
Traffic
Describes the MPLS QoS feature and the MPLS Traffic
Engineering—DiffServ Aware feature and how to configure
them.
Chapter 21 VLAN Tag-Based Quality of Service Describes the VLAN Tag-Based feature that enables you to
apply a single QoS policy to a group of IEEE 802.1Q VLAN
subinterfaces.
Chapter Title Description

Cisco 10000 Series Specifications

General

Brand	Cisco
Model	10000 Series
Category	Network Router
Language	English