EasyManuals Logo

Cisco 10000 Series User Manual

Cisco 10000 Series
854 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #96 background imageLoading...
Page #96 background image
1-52
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
Chapter 1 Quality of Service Overview
QoS Features, Commands, and Changes
mpls experimental Command
Cisco IOS Release: Release 12.0(26)S
Description: The mpls experimental command was introduced on the PRE1 to configure MPLS
experimental (EXP) levels for a VC class or for a PVC member of a bundle. The VC class is applied to
the PVC bundle and thus applied to all PVC members of the bundle.
oam-bundle Command
Cisco IOS Release: Release 12.0(26)S
Description: The oam-bundle command was introduced on the PRE1 to enable end-to-end F5
Operation, Administration, and Maintenance (OAM) loopback cell generation and OAM management
for all permanent virtual circuit (PVC) members of a bundle or a VC class that can be applied to a PVC
bundle.
precedence Command
Cisco IOS Release: Release 12.0(26)S
Description: The precedence command was introduced on the PRE1 to configure precedence levels for
a virtual circuit (VC) class, VC, or permanent virtual circuit (PVC) member of a bundle. The VC class
is assigned to a PVC bundle and thus applied to all PVC members of that bundle.
precedence Command (Frame Relay VC-bundle-member)
Cisco IOS Release: Release 12.0(26)S
Description: The precedence command was introduced on the PRE1 to configure the precedence levels
for a Frame Relay permanent virtual circuit (PVC) bundle member.
protect Command
Cisco IOS Release: Release 12.0(26)S
Description: The protect command was introduced on the PRE1 to configure a virtual circuit (VC) class
with protected group or protected VC status for application to a PVC bundle member and to configure a
specific VC or permanent virtual circuit (PVC) as part of a protected group of the bundle or to configure
it as an individually protected VC or PVC bundle member.
protect Command (Frame Relay VC-bundle-member)
Cisco IOS Release: Release 12.0(26)S
Description: The protect command was introduced on the PRE1 to configure a Frame Relay protected
permanent virtual circuit (PVC) bundle member with protected group or protected PVC status.

Table of Contents

Other manuals for Cisco 10000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 10000 Series and is the answer not in the manual?

Cisco 10000 Series Specifications

General IconGeneral
BrandCisco
Model10000 Series
CategoryNetwork Router
LanguageEnglish

Related product manuals