EasyManuals Logo

Cisco 10000 Series User Manual

Cisco 10000 Series
854 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #377 background imageLoading...
Page #377 background image
11-35
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
Chapter 11 Managing Packet Queue Congestion
Verifying and Monitoring Layer 3 Packet Dropping
Current average queue length: 0 packets
-------------------------------------------------
Min Max Prob Rand-Drops Tail-Drops
-------------------------------------------------
0 16 32 1/10 0 0
1 18 32 1/10 0 0
2 20 32 1/10 0 0
3 22 32 1/10 0 0
4 24 32 1/10 0 0
5 26 32 1/10 0 0
6 28 32 1/10 0 0
7 30 32 1/10 0 0
Queue-limit: 64 packets
Class-map: class-default (match-any) (1066/0)
158641 packets, 5931487 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any (1067)
158641 packets, 5931487 bytes
5 minute rate 0 bps
Output queue: 0/128; 31672/1695625 packets/bytes output, 0 drops
Verification Examples for DSCP-Based WRED
Example 11-7 shows sample output for the show policy-map interface command. In this example,
DSCP-based weighted random early detection is configured on the nyusers class queue. The output
shows the exponential weight of 9 used to calculate the average queue size. In this case, WRED has not
dropped any packets based on DSCP 8 and DSCP 0 (default).
Example 11-7 Displaying DSCP-Based WRED Statistics
Router# show policy-map interface GigabitEthernet 3/0/0
GigabitEthernet3/0/0
Service-policy output: manhattan
Class-map: nyusers (match-all)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: access-group 101
Output queue: 0/128; 0/0 packets/bytes output, 0 drops
Bandwidth : 47 kbps (Weight 0)
Random-detect (DSCP-based):
Exponential weight: 9 (1/512)
Current average queue length: 0 packets
------------------------------------------------------
Diff-Serv Min Max Mark Rand-Drops Tail-Drops
codepoint thres thres probability
------------------------------------------------------
8 24 40 1/50 0 0
Default 64 128 1/10 0 0
Class-map: class-default (match-any)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any
Output queue: 0/4096; 0/0 packets/bytes output, 0 drops

Table of Contents

Other manuals for Cisco 10000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 10000 Series and is the answer not in the manual?

Cisco 10000 Series Specifications

General IconGeneral
BrandCisco
Model10000 Series
CategoryNetwork Router
LanguageEnglish

Related product manuals