Cisco 10000 Series User Manual

19-50
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
Chapter 19 Configuring Quality of Service for PVC Bundles
Frame Relay PVC Selection
pvc 201
class premium
dscp 31-24
protect group
pvc 202
class basic
dscp other
protect group
Configuration Example for MPLS EXP-Based Frame Relay PVC Selection
Example 19-8 shows how to configure MPLS experimental (EXP)-based Frame Relay PVC selection.
The sample configuration adds PVCs 101 and 100 to the PVC bundle named router2 and configures the
MPLS EXP levels for each PVC bundle member.
Example 19-8 Configuring MPLS EXP-Based Frame Relay PVC Selection
interface serial8/0/0
encapsulation frame-relay
mpls label protocol ldp
tag-switching ip
frame-relay vc-bundle router2
pvc 101
exp 0,2,7
pvc 100
exp other
Verifying and Monitoring Frame Relay PVC Selection
To verify and monitor the configuration and operation of Frame Relay PVC selection, enter any of the
following commands in privileged EXEC configuration mode:

Cisco 10000 Series Specifications

General

Brand	Cisco
Model	10000 Series
Category	Network Router
Language	English