Cisco 10000 Series User Manual

1-50
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
Chapter 1 Quality of Service Overview
QoS Features, Commands, and Changes
Cisco IOS Release: Release 12.3(7)XI1
Description: This feature was modified on the PRE2 to provide strict priority queuing. To specify a
bandwidth rate for a strict priority queue, you must specify the police command.
Cisco IOS Release: Release 12.2(28)SB
Description: This feature was integrated in Cisco IOS Release 12.2(28)SB.
Cisco IOS Release: Release 12.2(31)SB2
Description: This command was introduced on the PRE3.
PVC Bundles
Documentation Reference: Chapter 19, “Configuring Quality of Service for PVC Bundles”
• bump Command, page 1-50
• bump Command (Frame Relay VC-bundle-member), page 1-51
• bundle Command, page 1-51
• class-bundle Command, page 1-51
• class-vc Command, page 1-51
• dscp Command (Frame Relay VC-bundle-member), page 1-51
• exp Command, page 1-51
• frame-relay vc-bundle Command, page 1-51
• mpls experimental Command, page 1-52
• oam-bundle Command, page 1-52
• precedence Command, page 1-52
• precedence Command (Frame Relay VC-bundle-member), page 1-52
• protect Command, page 1-52
• protect Command (Frame Relay VC-bundle-member), page 1-52
• pvc-bundle Command, page 1-53
• pvc Command (Frame Relay VC-bundle), page 1-53
• PVC Bundles Over ATM and Frame Relay Feature, page 1-53
• ATM PVC Bundle Enhancement—MPLS EXP-Based PVC Selection Feature, page 1-53
• Frame Relay PVC Bundles with QoS Support for IP and MPLS Feature, page 1-53
bump Command
Cisco IOS Release: Release 12.0(26)S
Description: The bump command was introduced on the PRE1 to configure the bumping rules for an
ATM PVC bundle or a specific ATM PVC bundle member.

Cisco 10000 Series Specifications

General

Brand	Cisco
Model	10000 Series
Category	Network Router
Language	English