Cisco 10000 Series User Manual

16-62
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
Chapter 16 Fragmenting and Interleaving Real-Time and Nonreal-Time Packets
Configuration Examples for Link Fragmentation and Interleaving
Router(config)# interface atm 6/0/0.1 point-to-point
Router(config-if)# no ip address
Router(config-if)# pvc 101/34
Router(config-if-atm-vc)# vbr-nrt 512 256 20
Router(config-if-atm-vc)# encapsulation aal5mux
Router(config-if-atm-vc)# ppp virtual-template 2
Router(config-if-atm-vc)# ppp multilink group 8
!
Router(config)# interface atm 6/0/0.2 point-to-point
Router(config-if)# no ip address
Router(config-if)# pvc 101/35
Router(config-if-atm-vc)# vbr-nrt 512 256 20
Router(config-if-atm-vc)# encapsulation aal5mux
Router(config-if-atm-vc)# ppp virtual-template 2
Router(config-if-atm-vc)# ppp multilink group 8
!
Router(config)# interface atm 6/0/0.3 point-to-point
Router(config-if)# no ip address
Router(config-if)# pvc 101/36
Router(config-if-atm-vc)# vbr-nrt 512 256 20
Router(config-if-atm-vc)# encapsulation aal5mux
Router(config-if-atm-vc)# ppp virtual-template 2
Router(config-if-atm-vc)# ppp multilink group 8
Configuration Example for MLP Over Frame Relay-Based LFI
Example 16-18 shows how to add Frame Relay links to a MLP bundle. In the example, MLP is enabled
on the Multilink 10002 interface and on the virtual template named Virtual-Template1. The
service-policy named Business is applied to the Multilink 10002 interface. Virtual-Template 1 is applied
to DLCI 101 on the serial subinterface 1/0/1.1.
Example 16-18 Configuring MLP Over Frame Relay-Based LFI
Router(config)# interface Multilink10002
Router(config-if)# ip address 10.1.2.2 255.255.255.0
Router(config-if)# ppp multilink
Router(config-if)# ppp multilink fragment disable
Router(config-if)# ppp multilink fragment delay 8
Router(config-if)# ppp multilink interleave
Router(config-if)# ppp multilink group 10002
Router(config-if)# service-policy output Business
!
Router(config)# interface serial1/0/1
Router(config-if)# no ip address
Router(config-if)# encapsulation frame-relay
Router(config-if)# no keepalive
!
Router(config)# interface serial1/0/1.1 point-to-point
Router(config-if)# no keepalive
Router(config-if)# frame-relay interface-dlci 18 ppp Virtual-Template209
Router(config-if)# service-policy output Premium
!
Router(config)# interface Virtual-Template1
Router(config-if)# description mlp_lfi_c10k
Router(config-if)# no ip address
Router(config-if)# ppp chap hostname lfiofr-10002
Router(config-if)# ppp multilink
Router(config-if)# ppp multilink group 10002
!

Cisco 10000 Series Specifications

General

Brand	Cisco
Model	10000 Series
Category	Network Router
Language	English