Cisco 10000 Series User Manual

1-33
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
Chapter 1 Quality of Service Overview
QoS Features, Commands, and Changes
ppp multilink fragmentation Command
Cisco IOS Release: Release 12.0(23)SX
Description: The ppp multilink fragmentation command was introduced on the PRE1 to enable
fragmentation.
Cisco IOS Release: Release 12.2(16)BX
Description: This command was introduced on the PRE2.
Cisco IOS Release: Release 12.2
Description: The no ppp multilink fragmentation command was changed to ppp multilink fragment
disable. The no ppp multilink fragmentation command was recognized and accepted through
Cisco
IOS Release 12.2.
Cisco IOS Release: Release 12.2(28)SB
Description: This command was integrated in Cisco IOS Release 12.2(28)SB.
Cisco IOS Release: Release 12.2(31)SB2
Description: This command was introduced on the PRE3.
ppp multilink fragment disable Command
Cisco IOS Release: Release 11.3
Description: The ppp multilink fragment disable command was introduced on the PRE1 as
ppp
multilink fragmentation.
Cisco IOS Release: Release 12.2
Description: The no ppp multilink fragmentation command was changed to ppp multilink fragment
disable to disable fragmentation. The no ppp multilink fragmentation command was recognized and
accepted through Cisco IOS Release 12.2.
Cisco IOS Release: Release 12.2(28)SB
Description: This command was integrated in Cisco IOS Release 12.2(28)SB.
Cisco IOS Release: Release 12.2(31)SB2
Description: This command was introduced on the PRE3.
ppp multilink group Command
Cisco IOS Release: Release 12.0
Description: The ppp multilink group command was introduced on the PRE1 as multilink-group.

Cisco 10000 Series Specifications

General

Brand	Cisco
Model	10000 Series
Category	Network Router
Language	English