EasyManuals Logo

Cisco 10000 Series User Manual

Cisco 10000 Series
854 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #452 background imageLoading...
Page #452 background image
14-14
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
Chapter 14 Simultaneous Policy Maps
Configuration Examples for Simultaneous Policy Maps
Virtual-Template 1
sessions per-vc limit 1000
!
interface Virtual-Template1
ip unnumbered Loopback1
service-policy output pppoe_sess_output_policy
Configuration Examples for Simultaneous Policy Maps
This section provides the following configuration examples:
Configuration Example for Applying Simultaneous Policy Maps on Ethernet Interfaces and PPPoE
Sessions, page 14-14
Configuration Example for Applying Simultaneous Policies on 802.1Q Interfaces and PPPoE
Sessions, page 14-16
Configuration Example for Applying Simultaneous Policies on 802.1Q QinQ Interfaces and PPPoE
Sessions, page 14-17
Configuration Example for Applying Simultaneous Policies on ATM VCs and PPPoA Sessions,
page 14-17
Configuration Example for Applying Simultaneous Policies on ATM VCs and PPPoE Sessions,
page 14-18
Configuration Example for Applying Simultaneous Policy Maps on Ethernet
Interfaces and PPPoE Sessions
The following configuration example shows how to create and apply simultaneous policy maps on
Ethernet interfaces and PPP sessions. The Client Configuration shows that no policies have been applied.
In the PTA Configuration, the interface policy named cbwfq_out_policy is applied to the Gigabit
subinterface Ethernet 1/0/0.2 and the session policy named police_out_policy is applied to the virtual
template named Virtual-Template1, which is in turn applied to the BBA group named VRF_1.
Client Configuration
bba-group pppoe VRF_1
virtual-template 1
sessions per-vc limit 1000
sessions per-mac limit 1000
sessions per-vlan limit 1000
!
interface GigabitEthernet8/0/0
no ip address
!
interface GigabitEthernet8/0/0.2
encapsulation dot1Q 2
pppoe enable group VRF_1
!
Interface Virtual-Template1
mtu 1492
ip address negotiated
keepalive 30
ppp max-terminate 10
ppp max-failure 10
ppp lcp delay 1
ppp pap sent-username gomer1@domain1.com password 0 gomer

Table of Contents

Other manuals for Cisco 10000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 10000 Series and is the answer not in the manual?

Cisco 10000 Series Specifications

General IconGeneral
BrandCisco
Model10000 Series
CategoryNetwork Router
LanguageEnglish

Related product manuals