EasyManua.ls Logo

Cisco 10000 Series

Cisco 10000 Series
854 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1-42
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
Chapter 1 Quality of Service Overview
QoS Features, Commands, and Changes
Cisco IOS Release: Release 12.2(31)SB2
Description: This command was introduced on the PRE3 with an oversubscription factor from 1 to 500.
ATM Virtual Circuit Oversubscription Feature
Cisco IOS Release: Release 12.2(16)BX
Description: The ATM virtual circuit (VC) oversubscription feature was introduced on the PRE2 to
enable you to assign a rate to a variable bit rate-nonreal time (VBR-nrt) VC, a constant bit rate (CBR)
VC, or a virtual path (VP) tunnel that is greater than the speed of the interface. The amount of allowable
oversubscription is 1 to 50 times the physical transmission capacity.
Cisco IOS Release: Release 12.3(7)XI3
Description: The amount of allowable ATM VC oversubscription was increased to 500 on the PRE2.
For example, you can oversubscribe the physical transmission capacity from 1 to 500 times.
Cisco IOS Release: Release 12.2(28)SB
Description: This feature was integrated in Cisco IOS Release 12.2(28)SB.
Cisco IOS Release: Release 12.2(31)SB2
Description: This command was introduced on the PRE3 with an oversubscription factor from 1 to 500.
map-class frame-relay Command
Documentation Reference: Appendix A, “Configuring Frame Relay QoS Using Frame Relay Legacy
Commands”
Cisco IOS Release: Release 12.0(23)SX
Description: The map-class frame-relay command was introduced on the PRE1.
Cisco IOS Release: Release 12.0(25)S
Description: This command was ported to the S train.
Cisco IOS Release: Release 12.2(15)BX
Description: This command was introduced on the PRE2.
Cisco IOS Release: Release 12.2(28)SB
Description: This command was integrated in Cisco IOS Release 12.2(28)SB.
Frame Relay PVC Oversubscription Feature
Cisco IOS Release: Release 12.3(7)XI1
Description: The Frame Relay PVC oversubscription feature was introduced on the PRE2 to enable you
to assign a total committed information rate (CIR) to a given PVC that is greater than the speed of the
interface.

Table of Contents

Other manuals for Cisco 10000 Series

Related product manuals