EasyManuals Logo

Cisco 10000 Series User Manual

Cisco 10000 Series
854 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #288 background imageLoading...
Page #288 background image
7-38
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
Chapter 7 Marking Traffic
Verifying Traffic Marking
Verification Examples for Traffic Marking
Example 7-14 shows how to verify marking for the traffic classes in a policy map. In this example, traffic
assigned to the Gold class has the precedence bits set to 5.
Example 7-14 Verifying Marking in a Policy Map
Router# show policy-map Child
Policy Map Child
Class Bronze
police percent 30 6 ms 4 ms conform-action transmit exceed-action set-prep
Class Gold
police 8000 2000 4000 conform-action transmit exceed-action set-qos-transp
set ip precedence 5
Example 7-15 shows how to verify marking on a specific interface. In this example, the QoS policy is a
hierarchical policy that is attached to PVC 5/101 on the ATM 3/0/0.3 subinterface. In the Child policy,
the Bronze class indicates to set the DSCP bits of Bronze packets to 3. The Gold class indicates to set
the IP precedence bits of Gold packets to 5.
Example 7-15 Verifying Marking in a Hierarchical Policy
Router# show policy-map interface atm 3/0/0.3
ATM3/0/0.3: VC 5/101 -
Service-policy output: Parent
Class-map: class-default (match-any)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any
Output queue: 0/64; 0/0 packets/bytes output, 0/0 drops
Shape : 2000 kbps
Service-policy : Child
Class-map: Bronze (match-all)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: ip precedence 3 5
Police:
600000 bps, 1536 limit, 1000 extended limit
conformed 0 packets, 0 bytes; action: transmit
exceeded 0 packets, 0 bytes; action: set-prec-transmit 2
violated 0 packets, 0 bytes; action: drop
QoS Set
dscp 3
Packets marked 0
Class-map: Gold (match-all)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: ip precedence 2
Police:
8000 bps, 2000 limit, 4000 extended limit
conformed 0 packets, 0 bytes; action: transmit
exceeded 0 packets, 0 bytes; action: set-qos-transmit 4
violated 0 packets, 0 bytes; action: drop
QoS Set
precedence 5

Table of Contents

Other manuals for Cisco 10000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 10000 Series and is the answer not in the manual?

Cisco 10000 Series Specifications

General IconGeneral
BrandCisco
Model10000 Series
CategoryNetwork Router
LanguageEnglish

Related product manuals