Cisco 10000 Series User Manual

19-52
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
Chapter 19 Configuring Quality of Service for PVC Bundles
Frame Relay PVC Selection
Verification Example for Monitoring PVC Bundles
Example 19-9 shows sample out from the show frame-relay vc-bundle command.
Example 19-9 Sample Output for the show frame-relay vc-bundle Command
Router# show frame-relay vc-bundle new-york
new-york on serial 0.1 - Status: UP Match-type: Precedence
Config.ActiveBumpingPG/CIR
NameDLCILevelLevelto/acceptPVkbpsStatus
ny-control100774/Yespv 56 up
ny-premium1016-56-57/Nopg256up
ny-priority1024-24-21/Yespg512up
ny-basic*1031-01-0-/Yespg256up
* Indicates that this VC is responsible for carrying unmapped traffic.
Router# show frame-relay ip tcp
header-compression [interface type number]
Displays statistics and TCP/IP header compression information
for an interface.
(Optional) interface type number specifies the interface type and
number.
Router# show adjacency [summary [type number]]
[detail]
Displays information about the Cisco Express Forwarding (CEF)
adjacency table or the hardware Layer 3-switching adjacency
table.
(Optional) summary displays a summary of CEF adjacency
information.
(Optional) type number specifies the type and number of the
interface (for example, serial 1/0/0).
(Optional) detail displays the protocol detail and timer
information.
Command Purpose

Cisco 10000 Series Specifications

General

Brand	Cisco
Model	10000 Series
Category	Network Router
Language	English