xl
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
About This Guide
Description
Added strict priority queuing. Removed the ability to specify a rate using the priority command.
Description
Created the Cisco 10000 Series Router Quality of Service Configuration Guide.
Audience
This guide is designed for system and network managers who are responsible for integrating quality of
service features into their networks. These managers should be experienced using Cisco
IOS software
and should be familiar with the operation of the Cisco 10000 series router.
Document Organization
This guide contains the following chapters:
Cisco IOS Release Part Number Publication Date
Release 12.0(23)SX1
Release 12.0(25)S
OL-4388-02 April, 2004
Cisco IOS Release Part Number Publication Date
Release 12.0(25)SX OL-4388-01 June, 2003
Chapter Title Description
Chapter 1 Quality of Service Overview Describes the process and components involved in configuring
QoS on the router. Lists the QoS features supported and feature
changes.
Chapter 2 Classifying Traffic Describes how to classify traffic using class maps.
Chapter 3 Configuring QoS Policy Actions and
Rules
Describes how to create QoS policies using policy maps and the
types of policy actions supported.
Chapter 4 Attaching Service Policies Describes how to attach QoS policies to various interfaces.
Chapter 5 Distributing Bandwidth Between Queues Describes bandwidth allocation and how to use the bandwidth
command to distribute bandwidth between traffic queues.
Chapter 6 Policing Traffic Describes traffic policing and how to configure policing for
traffic classes based on kilobits per second or as a percentage of
available bandwidth.
Chapter 7 Marking Traffic Describes traffic marking and how to configure it on inbound
and outbound interfaces.
Chapter 8 Prioritizing Services Describes how to configure a traffic class as a priority class that
receives preferential treatment.
Chapter 9 Shaping Traffic Describes the mechanisms used to shape traffic on the router.