Cisco 10000 Series User Manual

10-13
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
Chapter 10 Overhead Accounting
Verification Examples for Overhead Accounting
Verification Examples for Overhead Accounting
This section provides the following verification examples:
• Verifying ATM Overhead Accounting Using show policy-map, page 10-13
• Verifying Overhead Accounting Using show running-config, page 10-14
• Verifying Ethernet Overhead Accounting with User-Defined Option, page 10-14
Verifying ATM Overhead Accounting Using show policy-map
The following sample output from the show policy-map command indicates that ATM overhead
accounting is enabled for shaping and disabled for bandwidth:
Service-policy output:unit-test
Class-map: class-default (match-any)
100 packets, 1000 bytes
30 second offered rate 800 bps, drop rate 0 bps
Match: any
shape (average) cir 154400, bc 7720, be 7720
target shape rate 154400
overhead accounting: enabled
bandwidth 30% (463 kbps)
overhead accounting: disabled
queue limit 64 packets
(queue depth/total drops/no-buffer drops) 0/0/0
(packets output/bytes output) 100/1000
The following sample output from the show policy-map command indicates that ATM overhead
accounting is enabled for the class-default class for shaping. The BRAS-DSLAM encapsulation is dot1q
and the subscriber line encapsulation is snap-rbe based on the AAL3 service.
Policy Map unit-test
Class class-default
Average Rate Traffic Shaping
cir 10% account dot1q aal3 snap-rbe
The following sample output from the show policy-map interface command indicates that ATM
overhead accounting is enabled for shaping and disabled for bandwidth:
Service-policy output:unit-test
Class-map: class-default (match-any)
100 packets, 1000 bytes
30 second offered rate 800 bps, drop rate 0 bps
Match: any
shape (average) cir 154400, bc 7720, be 7720
target shape rate 154400
overhead accounting: enabled
Router# show running-config
Displays the running configuration on the router. The output
shows the AAA setup and the configuration of the policy map,
ATM VC, PPPoA, dynamic bandwidth selection, virtual
template, and RADIUS server.
Command Purpose

Cisco 10000 Series Specifications

General

Brand	Cisco
Model	10000 Series
Category	Network Router
Language	English