Cisco 10000 Series User Manual

Contents
v
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
MQC Support for IP Sessions 1-29
Per-Session Shaping for ATM Interfaces 1-29
Per Session Rate Limiting 1-29
Per User Multiservice Rate Limiting 1-29
Per Session Service Policy Using RADIUS 1-30
Per Session Shaping and Queuing on LNS 1-30
PPP Session Queuing on ATM VCs 1-30
Layer 2 Access Concentrator 1-30
Classification, Policing, and Marking on the LAC 1-30
LAC QoS 1-30
Link Fragmentation and Interleaving 1-31
interface multilink Command 1-31
multilink group Command 1-31
ppp multilink Command 1-32
ppp multilink fragment-delay Command 1-32
ppp multilink fragmentation Command 1-33
ppp multilink fragment disable Command 1-33
ppp multilink group Command 1-33
ppp multilink interleave Command 1-34
MLP Over ATM-Based LFI Feature 1-34
Multi-VC MLP Over ATM-Based LFI Feature 1-34
MLP Over Frame Relay-Based LFI Feature 1-35
MLP Over Serial-Based LFI Feature 1-35
FRF.12 Fragmentation Feature 1-35
Marking Traffic 1-36
set atm-clp Command 1-36
set cos Command 1-36
set discard-class Command 1-36
set fr-de Command 1-37
set ip dscp Command 1-37
set ip precedence Command 1-37
set mpls experimental Command 1-37
set mpls experimental imposition Command 1-38
set qos-group Command 1-38
Marking Feature 1-38
Modular QoS Command Line Interface 1-39
MQC Feature 1-39
QoS CLI Migration from PRE2 to PRE3 1-39
Overhead Accounting 1-39
ATM Overhead Accounting 1-40

Cisco 10000 Series Specifications

General

Brand	Cisco
Model	10000 Series
Category	Network Router
Language	English