Cisco 10000 Series User Manual

17-64
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
Chapter 17 Configuring Dynamic Subscriber Services
Queuing PPP Sessions on ATM VCs
Example 17-33 Displaying PPP Session Information—show pxf cpu queue session Command
Router# show pppoe session
1 session in LOCALLY_TERMINATED (PTA) State
1 session total
Uniq ID PPPoE RemMAC Port VT VA State
SID LocMAC VA-st Type
14 6 0009.b68d.bb37 ATM2/0/7.5555 555 Vi3.1 PTA
0009.b68d.bc37 VC: 1/5555 UP
Router#
Router#
Router# show pxf cpu queue session sid 6
ATM2/0/7.5555: PVC 1/5555
VCCI/ClassID ClassName QID Length/Avg Max Dequeues Drops(Tail/Random)
2623/0 class-default 1858 0/0 77 0 0/0
$1 2623/1 cm_0 1856 0/0 77 0 0/0
2623/2 cm_1 1859 0/0 40 0 0/0
2623/31 net-control 591 0/1 1105 335137 0/0
Legend:
$x: Priority Queue level x
b: PQ Activation and Dequeue Blocked
~: RED Queue
P: MLP Pkt Queue
F: MFR Pkt Queue
M1:MLP , M5:MLPFR , MA:MLPOA , M6:FRF12 , M7:MLFR, M8:FRF12_16
Example 17-34 uses the show policy-map session command to display QoS policy map statistics for
traffic in the downstream direction. The example also shows the policy map configurations.
Example 17-34 Displaying PPP Session Information—show policy-map session Command
Router# show pppoe session
1 session in LOCALLY_TERMINATED (PTA) State
1 session total
Uniq ID PPPoE RemMAC Port VT VA State
SID LocMAC VA-st Type
14 6 0009.b68d.bb37 ATM2/0/7.5555555 Vi3.1 PTA
0009.b68d.bc37 VC: 1/5555 UP
Router#
Router#
Router# show policy-map session uid 14
SSS session identifier 14 -
Service-policy output: pm_hier2_0_2
Class-map: class-default (match-any)
0 packets, 0 bytes
30 second offered rate 0 bps, drop rate 0 bps
Match: any
0 packets, 0 bytes
30 second rate 0 bps
Queueing
queue limit 50 packets
(queue depth/total drops/no-buffer drops) 0/0/0
(pkts output/bytes output) 0/0

Cisco 10000 Series Specifications

General

Brand	Cisco
Model	10000 Series
Category	Network Router
Language	English