Cisco 10000 Series

18-8
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
Chapter 18 Regulating and Shaping Subscriber Traffic
Subscriber-Based IP Quality of Service
Note In Table 18-2 and Table 18-3, “Not Applicable” indicates that you cannot do the action on a Cisco
product or that it has no meaning in the context indicated. “Not Available” means the action is not
supported. When configuring an input policy map for a VAI, be careful that you do not include the “Not
Applicable” or “Not Available” policy actions indicated. If you do, an error message appears.
Table 18-3 lists the output policy actions that you can define in a policy map for specific interface types.
Ta b l e 18-2 Input Policy Map Actions
Policy Map
Actions
Interface Type
Normal Tag (MPLS VPN) Virtual Access ATM UBR VCs
bandwidth Not Applicable Not Applicable Not Applicable Not Applicable
queue-limit Not Applicable Not Applicable Not Applicable Not Applicable
priority Not Applicable Not Applicable Not Applicable Not Applicable
shape Not Available Not Available Not Available Not Available
random-detect Not Applicable Not Applicable Not Applicable Not Applicable
set ip prec/dscp Va l i d Not Applicable Valid Valid
set qos-group Vali d Vali d Valid Va l i d
set atm-clp Not Applicable Not Applicable Not Applicable Not Applicable
set cos Not Applicable Not Applicable Not Applicable Not Applicable
police Va l id Valid Valid Va l i d
set mpls-exp Not Available Not Available Not Available Not Available
Ta b l e 18-3 Output Policy Map Actions
Policy Map
Actions
Interface Type
Normal Tag (MPLS VPN) Virtual Access ATM UBR VCs
bandwidth Va l i d Va l id Va li d
(Applied to the
VC, not the VAI)
Not Applicable
queue-limit Vali d Va l i d Not Available Not Available
priority Va l id Va l i d Va l i d
(Applied to the
VC, not the VAI)
Not Applicable
shape Va l i d Va l id Va li d
(Applied to the
VC, not the VAI)
Not Applicable
random-detect Va l i d Va l id Not Available Not Available