EasyManuals Logo

Cisco 10000 Series User Manual

Cisco 10000 Series
854 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #738 background imageLoading...
Page #738 background image
19-46
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
Chapter 19 Configuring Quality of Service for PVC Bundles
Frame Relay PVC Selection
Step 6
Router(config-fr-vcb-vc)# precedence
{level | other}
(Optional) Configures the precedence levels for a Frame Relay
PVC bundle member. This command configures
precedence-based PVC selection.
level specifies the precedence level or levels for this Frame Relay
PVC bundle member. Valid values are from 0 to 7.
You can configure a PVC bundle member with a single
precedence level (0), multiple individual precedence levels
(0,2,3), a range of precedence levels (0-2), multiple ranges of
precedence levels (0-2,4-5), or a combination of individual levels
and level ranges (0,1,2-4,7).
Note This command is available when the PVC bundle match
type is set to precedence.
other specifies that this Frame Relay PVC bundle member
handles all of the remaining precedence levels that are not
explicitly configured on any other bundle members.
Note Critical non-IP traffic automatically uses precedence
level 0.
Step 7
Router(config-fr-vcb-vc)# dscp {level |
other}
(Optional) Configures the differentiated services code point
(DSCP) levels for a Frame Relay PVC bundle member. This
command configures DSCP-based PVC selection.
level specifies the DSCP level or levels for this Frame Relay
PVC bundle member. Valid values are from 0 to 63.
You can configure a PVC bundle member with a single DSCP
level (9), multiple individual DSCP levels (25,35,45), a range of
DSCP levels (25-35), multiple ranges of DSCP levels
(25-35,45-55), or a combination of individual levels and level
ranges (10,20,25-35,40,45-55,60).
Note This command is available when the PVC bundle match
type is set to dscp. By default, the PVC members are
configured to reject bumping when the match-type is
dscp.
other specifies that this Frame Relay PVC bundle member
handles all of the remaining DSCP levels that are not explicitly
configured on any other bundle members.
Command Purpose

Table of Contents

Other manuals for Cisco 10000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 10000 Series and is the answer not in the manual?

Cisco 10000 Series Specifications

General IconGeneral
BrandCisco
Model10000 Series
CategoryNetwork Router
LanguageEnglish

Related product manuals