Cisco 10000 Series - Page 837

Index
IN-7
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
class maps 12
Frame Relay bundles 36, 39, 42
map classes for Frame Relay 1
policy maps 19
CS1 through CS7 6
D
data, policing rate 23
data-link connection identifier
allocating PVC bandwidth share 2
assigning 19
description of 17, 16
VoIP packet classification 4
IP RTP Priority 5
See also DLCI.
DBS, See dynamic bandwidth selection.
dbs enable command 12
DE bit 6
default class
bandwidth-remaining command 6
default traffic class 11
delay, managing 7
differentiated services
assured forwarding
assured forwarding, class drop probability 7
assured forwarding classes 7
best effort, DSCP 0 6
class selector code points 6, 7
compliance with IETF standards 6
DiffServ suggested DSCP values 8
DSCP 6
expedited forwarding, per-hop behavior 7
matching criteria 7
per-hop behavior 6
recommended values 21
reserved keywords 7
RFCs defining DSCP values 8
setting DSCP bits 12
weighted random early detection based on DSCP 9
differentiated services code point
assured forwarding
binary values 8
bits 6
code point values 7
DSCP
names 8
values 8
expedited forwarding
RFCs, defining DSCPs 8
discard-class
marking traffic 16, 33
setting 12
discard eligibility bit 6
displaying, statistics and configuration information for
policing
41
DLCI
assigning 16
associating map classes to 16
DotP marking, in nested hierarchical policies 8
dropping packets
based on CLP 31
drop policing action 12, 3
drop probability, assured forwarding classes 7
drop rate in random-detect command 8
how RED determines drop probability 10
interfaces not supporting drop policies 22
interfaces supporting drop policies 21
random early detection 9
verifying packet dropping 32
weighted random early detection 9, 11
drop profiles
for WRED 17
drop rate, random-detect command 9
DS3/E3 line card, maximum virtual circuits supported 8
DSCP, See differentiated services.
DSCP-based mapping for PVC bundles 40
dscp command (Frame Relay VC-bundle-member) 34