Cisco 10000 Series - Page 840

Index
IN-10
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
shaped UBR PVCs 5
VC scaling 7
high watermark 22, 24, 25, 38
hwm 24, 38
See also high watermark.
I
IEEE 802.1p, for inbound and outbound packets 10
IEEE 802.1Q, frame headers 10
inbound interfaces, hierachical policies 12
inheritance 10
ATM QoS 2
Frame Relay QoS 12
LAC QoS 30
interface multilink command 5
interfaces
ATM, queuing outbound traffic 7
attaching
ATM QoS policies 2, 5, 7, 8
Frame Relay QoS policies 11, 14, 15, 16, 17, 19
LAC QoS 30
policy maps 12, 32
QoS policies, service-policy command 3
virtual access interface QoS policies 23
VLAN QoS policies 21, 22, 23, 31
configuring QoS 5
Frame Relay, queuing outbound traffic 7
interfaces not supporting
bandwidth command 3
hierarchical policies 12
marking 20
packet drop policies 22
policing 18
priority queuing 4
queue-limit 22
random-detect 22
shaping 13
interfaces supporting
bandwidth command 2, 7
hierarchical policies 12
marking 20
packet drop policies 21
policing 17
priority queuing 4
queue-limit 21
random-detect 21
traffic shaping 13
oversubscribing 5, 31, 2, 45
See also oversubscribing.
packet input match statement 6
QoS inheritance 12
supporting the attachment of QoS policies 1
virtual LAN, queuing outbound traffic 7
interleaving 1
internal marking
discard-class 2
qos-group 2
set qos-group 13
Internet Engineering Task Force, differentiated services
RFCs
6
Internet Protocol
DSCP value 7
VoIP 4
IP differentiated services, setting the DSCP bits 9
IP precedence
precedence levels 6 and 7 17
recommended values 21
setting the precedence level 12
values 7, 4
weighted random early detection,
precedence-based
4, 5, 9, 11
IP Real-Time Protocol 4
ip rsvp bandwidth command 26
IP RTP 4, 5
IP RTP priority for VoIP (Frame Relay) 5
IP sessions
configuration examples for MQC 23