Cisco 10000 Series - Page 842

Index
IN-12
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
policing and marking traffic 18
QoS group marking 2, 13, 15
recommended values for marking 21
restrictions for traffic marking 20
set atm-clp command 2, 15
set mpls experimental imposition command 2, 15
set qos-group command 2, 15
verifying traffic marking 37
See also traffic marking.
match access-group command 12, 10
match-all command 5
match-any command 5
match command 1, 5, 9
match cos command 6
match discard-class command 6
match fr-de command 6
match input-interface command 6
match ip dscp command 7
match ip precedence command 7
match ip rtp command 7
match mpls-experimental command 16
match mpls-experimental-imposition command 8
match mpls experimental topmost command 8, 4
match-not command 6
match qos-group command 8
match statements in class maps 2, 5, 7, 11
maximum burst size 15
maximum threshold 8
default values 39
description of 19
guidelines for changing 39
in the random-detect command 9
recommended setting for random early detection 11
MBS, See maximum burst size.
metering, See policing.
MIB, See management information base.
minimum threshold 8
default values 39
description of 19
guidelines for changing 39
in the random-detect command 9
recommended setting for random early detection 11
MLP 2
modes for queuing
no atm pxf queuing 4, 6, 7
pxf queuing 4, 7
modular QoS CLI
class map 3, 4
implementing QoS 2, 34, 50, 29
policy map 3, 4
service-policy 3, 4
monitoring
bursts 23
policing 41
QoS policies 32
MPLS DiffServ tunneling modes
CE routers 16
MPLS experimental field 15
MPLS experimental 14
bits 4
configuring marking 8, 12, 31
mpls experimental command 9
mpls experimental other command 9
MPLS EXP field
See also MPLS experimental.
MPLS EXP field, setting using policy maps 7
mpls ip encapsulate explicit-null command 4
MPLS QoS 1
experimental field value 1
services supported 2
tunnel modes 3
pipe mode 10
short pipe mode 9
MQC, See modular QoS CLI.
MQC support for IP sessions 18
multilink PPP bundling, priority queuing 2
multiple queues, guidelines for configuring QoS 13
multi-VC MLP 2