Cisco 10000 Series - Page 847

Index
IN-17
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
attaching
VC classes 22, 27
bumping PVCs 16
configuration examples 29
creating
ATM bundles 18
Frame Relay bundles 20, 36, 42
Frame Relay configuration examples 49
management of 4, 14
mapping
for PVC bundles 40
MPLS EXP to bundle members 31
monitoring bundles 52
protection rules 3
PVC selection 31
restrictions for bundles 17
system limits for bundles 2
traffic bumping 3
verifying bundles 28
pvc command 15
pvc command (Frame Relay VC-bundle) 39
pvc-in-range command 12
PVCs, attaching ATM policies 8
PXF 18
PXF and shaping 5
pxf queuing mode 7
Q
QID, See queue IDs.
QoS
applying service policies 3
ATM attaching QoS policies 6
ATM inheritance 2
atm pxf queuing mode 3, 5, 31
attaching
ATM QoS policies 7
Frame Relay QoS policies 11, 14, 16, 17, 19
QoS policies 1
virtual access interface QoS policies 23
VLAN QoS policies 21, 22, 23
attaching ATM QoS policies 8
benefits of QoS 2
class map 3, 4
CLI migration from PRE2 to PRE3 3
configuring per session service policy 11
configuring QoS 5
creating Frame Relay policy 14
defining QoS actions 2
DSLAM model configurations 6
features 6
for subscribers 1, 2
Frame Relay
inheritance 12
traffic shaping 5, 6
input and output policy-map actions 4, 6, 7, 8
LAC inheritance 30
management information base for QoS 4
Model D.2 7
Model F 7
modular command line interface for implementing
QoS
2, 34, 50, 29
no atm pxf queuing mode 3
objectives of bandwidth and priority commands 7
order of execution for QoS features 4
packet marking 2
per session
rate limiting 3
service policy 5
policing traffic 11, 26
policy map 3, 4
defining QoS actions 2
definition of 3
QoS actions 4
precedence 6
QoS features and changes 11
QoS group
identifier, setting 28