Cisco 9971 - Set Subnet Mask Field

Set Subnet Mask Field
Procedure
Step 1
Set the DHCP Enabled option to No.
Step 2
Scroll to the Subnet Mask option, press Select, and enter a new subnet mask.
Step 3
Press Apply.
Set Default Router Field
Procedure
Step 1
Set the DHCP Enabled option to No.
Step 2
Scroll to the appropriate Default Router option, press Select, and enter a new router IP address.
Step 3
Press Apply.
Set DNS Server Fields
Procedure
Step 1
Set the DHCP Enabled option to No.
Step 2
Scroll to the appropriate DNS Server option, press Select, and enter a new DNS server IP address.
Step 3
Press Apply.
Step 4
If multiple DNS Servers can be configured, repeat Steps 2 and 3 as needed to assign backup DNS servers.
Set Alternate TFTP Field
You must enter the Alternate TFTP and TFTP server fields when you configure an off-premises phone for
SSL VPN to ASA using a built-in client.
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 10.0
83
Configure Network Settings