Cisco 9971 - Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager

d) Use the included screws and a #2 Phillips-head screwdriver to attach the bracket to the wall.
Figure 6: Mount Wall Bracket
Step 2
Attach the phone bracket to the IP Phone.
a) Detach the handset cord (and headset cord, if there is a headset), power cord, and any other attached cords
from the base of the phone.
b) Remove the label covers that conceal the screw holes.
c) Attach the phone bracket by inserting the tabs into the mounting tabs on the phone. The phone ports should
be accessible through the holes in the bracket.
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager
10.0
128
Lockable Wall Mount Components for Phone