Cisco 9971 - Non-Lockable Wall Mount Components for Phone; Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager

Ensure that the power cord and any other cable that does not terminate in the wall behind the bracket are
positioned in one of the cable-access openings in the bottom of the bracket. The phone and wall bracket
openings together form circular openings with room for one cable per opening.
Figure 14: Attach Phone to Wall Bracket
Step 5
Use the locking key to lock the phone to the wall bracket.
Step 6
Proceed to Adjust the Handset Rest, on page 154
Non-Lockable Wall Mount Components for Phone
This section describes how to install the ADA Non-Lockable Wall Mount Kit for 8961 Series and 9900 Series
IP Phones on a Cisco Unified IP Phone 8961, 9951, and 9971 when the phone is not connected to a Key
Expansion Module.
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager
10.0
136
Non-Lockable Wall Mount Components for Phone