To ChangeDescriptionOption
See Set Wireless Sign In Access Field,
on page 80.
Enables the display of the Wireless Sign in
Access window in the main Applications
menu:
•
On: The Wireless Sign In Access
window displays. Turning this value
on allows you to sign in or change your
Wireless user ID and password on the
main Applications menu. Otherwise,
to change your sign-in information,
navigate down to the Security menu
level and select either the LEAP or
EAP-FAST methods, both of which
require sign-in credentials.
•
Off: The Wireless Sign In Access
window does not display.
Default: Off
Wireless Sign in
Access
Scroll to IPv4 Setup and press Select.In the IPv4 Setup configuration submenu,
you can do the following:
•
Enable or disable the phone to use the
IP address that the DHCP server
assigns.
•
Manually set the IP Address, Subnet
Mask, Default Routers, DNS Server,
and Alternate TFTP servers.
For more information about the IPv4 address
fields, see Set Up IPv4, on page 73.
IPv4 Setup
Scroll to IPv6 Setup and press Select.In the IPv6 Setup configuration submenu,
you can do the following:
•
Enable or disable the phone to use the
IPv6 address that the DHCP server
assigns.
•
Manually set the IPv6 Address, Prefix
Length, Default Routers, DNS Server,
and Alternate TFTP servers.
For more information about the IPv6 address
fields, see Set Up IPv6, on page 76.
IPv6 Setup
Display only. Cannot configure.Unique Media Access Control (MAC)
address of the phone.
MAC Address
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager
10.0
68
Set Up Wireless LAN
To Next Page
Loading...
Need help?
General
