DescriptionFeature
Provides end users with the ability to record their telephone calls via a softkey.
For more information, see Enable Device Invoked Recording, on page 227.
Device Invoked Recording
Allows users to disconnect a call and get the dial tone by pressing only one button. When the
user presses the Release button while on a call or while dialing off-hook, the active call ends
and dial tone sounds. The New Call window appears on the selected line on the phone screen.
For more information, see Set Up Dial Tone from Release Button, on page 228.
Dial Tone From Release Key
Allows a user to transfer an active call to an available directed call park number that the user
dials or speed dials.
See Cisco Unified Communications Manager Features and Services Guide, “Call Park and
Directed Call Park” chapter.
Directed Call Park
Allows a user to transfer a ringing, connected, or held call directly to a voice-messaging system
or to the busy target. Divert acts on the highlighted call only. Incoming calls are not
automatically highlighted. If a second call rings while the user is on the first call, Divert acts
on the first call unless the user actively highlights the second call. When a call is diverted, the
line becomes available to make or receive new calls.
For more information about diverting calls to voicemail, see Cisco Unified Communications
Manager Features and Services Guide, “Immediate Divert” chapter.
For more information about Enhanced Immediate Divert, see Cisco Unified Communications
Manager System Guide, “Cisco Unified IP Phone” chapter.
Divert
Allows the Cisco Unified Communications Manager administrator to upgrade phone firmware
with a new load before resetting the previous load to an Inactive load status.
See Set Up Dual Bank Information, on page 224.
Dual Bank Information
When DND is turned on, either no audible rings occur during the ringing-in state of a call, or
no audible or visual notifications of any type occur.
See Cisco Unified Communications Manager Features and Services Guide, “Do Not Disturb”
chapter.
Do Not Disturb (DND)
Improves the video conference call flow by removing the black box that is displayed when
one party has the Auto Transmit setting on their phone set to Off.
See Set Up Enable Video On/Off, on page 228.
Enable Video On/Off
Enables an IP Phone to sleep (power down) and wake (power up) at predetermined times, to
promote energy savings
See Schedule Power Save Plus (EnergyWise) on Cisco IP Phone, on page 212.
EnergyWise
Improves the Secure Extension Mobility Cross Cluster (EMCC) feature by preserving the
network and security configurations on the login phone. Doing so maintains security policies,
preserves network bandwidth, and avoids network failure within the visiting cluster (VC).
See Cisco Unified Communications Manager Features and Services Guide.
Enhanced Secure Extension
Mobility Cross Cluster
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager
10.0
192
Telephony Features
To Next Page
Loading...
