Control Phone Web Page Access
For security purposes, access to the phone web pages is disabled by default. This practice prevents access to
the phone web pages and the Cisco Unified Communications Self Care Portal.
Some features, such as Cisco Quality Report Tool, do not function properly without access to the phone
web pages. Disabling web access also affects any serviceability application that relies on web access, such
as CiscoWorks.
Note
Procedure
Step 1
In Cisco Unified Communications Manager Administration, choose Device > Phone.
Step 2
Specify the criteria to find the phone and select Find, or select Find to display a list of all phones.
Step 3
Select the device name to open the Phone Configuration window for the device.
Step 4
Scroll to the Product Specific Configuration area.
Step 5
To enable access, from the Web Access drop-down list, choose Enabled.
Step 6
To disable access, from the Web Access drop-down list, choose Disabled.
Step 7
Select Save.
Related Topics
Access Web Page for Phone, on page 284
Enable Softkey Policy Control
Softkey Policy Control enables you to configure the following features as softkeys or programmable feature
buttons:
•
Malicious Caller ID
•
Pick Up
•
Group Pick Up
•
Other Pick Up
•
Meet Me
•
Quality Reporting Tool
•
Mobility
For more information, see:
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 10.0
237
Control Phone Web Page Access
To Next Page
Loading...
