CHAPTER 15
Cisco VXC VPN
•
Cisco VXC Requirements, page 253
•
Set Up Cisco VXC VPN, page 255
•
Cisco VXC VPN Limitations and Restrictions, page 259
Cisco VXC Requirements
The Cisco VXC VPN feature provides integrated VPN functionality for Cisco Virtualization Experience
Clients (Cisco VXC) 2111 and 2112. The feature enables VPN tunneling for the Cisco VXC 2111 and Cisco
VXC 2112 clients when they attach to a Cisco Unified IP Phone 8961, 9951, or 9971.
You can set up the Cisco VXC VPN and the phone VPN to use the same tunnel or separate tunnels in the
following configurations:
•
One tunnel for both Cisco VXC VPN traffic and phone VPN traffic
•
Two tunnels that use the same access credentials (one for Cisco VXC VPN traffic and another for phone
VPN traffic)
•
Two tunnels that use different access credentials (one for Cisco VXC VPN traffic and another for phone
VPN traffic). This configuration is only supported when a one-time password is applied.
You can configure the feature to prompt the user only once for access credentials (in the Phone VPN Sign In
window), or once each for the phone VPN (in the Phone VPN Sign In window) and for the Cisco VXC VPN
(in the VXC VPN Sign In window).
Cisco VXC Firmware
To support the VXC VPN feature, the Cisco VXC clients must be running the following minimum firmware
releases:
•
Cisco VXC 2112: ICA Firmware Release 7.1_118
•
Cisco VXC 2111: PCoIP Firmware Release 4.0 (Q3CY12)
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 10.0
253
To Next Page
Loading...
