If you cannot access the web page, it may be disabled by default.Note
To access the web page for a Cisco Unified IP Phone, follow these steps:
Procedure
Step 1
Obtain the IP address of the Cisco Unified IP Phone by using one of these methods:
a) Search for the phone in Cisco Unified Communications Manager Administration by choosing Device >
Phone. Phones that register with Cisco Unified Communications Manager display the IP address on the
Find and List Phones window and at the top of the Phone Configuration window.
b)
On the Cisco Unified IP Phone, press Applications , choose Administrator Settings > Network
Setup > IPv4 Setup, and then scroll to the IP Address option.
Step 2
Open a web browser and enter the following URL, where IP_address is the IP address of the Cisco Unified
IP Phone:
http://<IP_address> or https://<IP_address> (depending on the protocol supported by the Cisco Unified IP
Phone)
Related Topics
Control Phone Web Page Access, on page 237
Device Information
The Device Information area on a phone web page displays device settings and related information for the
phone. The following table describes these items.
Some of the items in the following table do not apply to all phone models.Note
To display the Device Information area, access the web page for the phone as described in Access Web Page
for Phone, on page 284, and then click the Device Information hyperlink.
Table 43: Device Information Area Items
DescriptionItem
Media Access Control (MAC) address of the phone.MAC Address
Unique, fixed name that is automatically assigned to the phone based on the
MAC address.
Host Name
Directory number that is assigned to the phone.Phone DN
Identifier of the firmware that is running on the phone.Version
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 10.0
285
Cisco IP Phone Web Page
To Next Page
Loading...
Need help?
General
