Display Wireless Statistics Screen
The Wireless Statistics screen displays statistics about the wireless Cisco Unified IP Phone 9971.
To display the Wireless Statistics screen, follow these steps:
Procedure
Step 1
Press Applications .
Step 2
Select Administrator Settings.
Step 3
Select Status.
Step 4
Select Wireless Statistics. See Wireless Statistics, on page 276 for a description of the Wireless statistics.
Step 5
To reset the Wireless statistics to 0, press Clear List.
Step 6
To exit the Wireless Statistics screen, press Exit.
Wireless Statistics
The following table describes the Wireless statistics on the phone.
Table 39: Wireless Statistics on the Cisco Unified IP Phone
DescriptionItem
Number of packets that the phone transmitted.Transmit Frames
Number of directed packets that the phone received.Directed Frames Received
Number of multicast packets that the phone received.Multicast Frames Received
Number of broadcast packets that the phone received.Broadcast Frames Received
Number of packets with errors that the phone received.Receive Errors
The phone has no buffers available to receive the packet.Receive No Buffers
Increments when an FCS error is detected in a received MPDU.Frame Checksum (FCS) Errors
Number of duplicate packets received by the phone.Duplicate Frames
Number of fragmented packets that the phone received.Fragments Received
Number of beacons that the phone received.Beacons Received
Number of AP association rejections that the phone received.Association Rejected
Number of AP association timeouts that the phone received.Association Timeouts
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager
10.0
276
Cisco Unified IP Phone Status
To Next Page
Loading...
