Cisco 9971 - Sample Lineinfo Output

<CallDuration>12835</CallDuration>
<CallStatus>null</CallStatus>
<CallSecurity>UNAUTHENTICATED</CallSecurity>
<CallPrecedence>ROUTINE</CallPrecedence>
<FeatureList/>
</CiscoIPPhoneCallInfo>
<VisibleFeatureList>
<Feature Position="1" Enabled="true" Label="End Call"/>
<Feature Position="2" Enabled="true" Label="Show Detail"/>
</VisibleFeatureList>
</CiscoIPPhoneCallLineInfo>
Sample LineInfo Output
The following XML code is an example of the output from the LineInfo command.
<CiscoIPPhoneLineInfo>
<Prompt/>
<Notify/>
<Status>null</Status>
<CiscoIPPhoneLines>
<LineType>9</LineType>
<lineDirNum>1028</lineDirNum>
<MessageWaiting>NO</MessageWaiting>
<RingerName>Chirp1</RingerName>
<LineLabel/>
<LineIconState>ONHOOK</LineIconState>
</CiscoIPPhoneLines>
<CiscoIPPhoneLines>
<LineType>9</LineType>
<lineDirNum>1029</lineDirNum>
<MessageWaiting>NO</MessageWaiting> <RingerName>Chirp1</RingerName>
<LineLabel/>
<LineIconState>ONHOOK</LineIconState>
</CiscoIPPhoneLines>
<CiscoIPPhoneLines>
<LineType>9</LineType>
<lineDirNum>1030</lineDirNum>
<MessageWaiting>NO</MessageWaiting>
<RingerName>Chirp1</RingerName>
<LineLabel/>
<LineIconState>CONNECTED</LineIconState>
</CiscoIPPhoneLines>
<CiscoIPPhoneLines>
<LineType>2</LineType>
<lineDirNum>9700</lineDirNum>
<MessageWaiting>NO</MessageWaiting>
<LineLabel>SD9700</LineLabel>
<LineIconState>ON</LineIconState>
</CiscoIPPhoneLines>
</CiscoIPPhoneLineInfo>
Sample ModeInfo Output
The following XML code is an example of the output from the ModeInfo command.
<?xml version="1.0" encoding="utf-8"?>
<CiscoIPPhoneModeInfo>
<PlaneTitle>Applications</PlaneTitle>
<PlaneFieldCount>12</PlaneFieldCount>
<PlaneSoftKeyIndex>0</PlaneSoftKeyIndex>
<PlaneSoftKeyMask>0</PlaneSoftKeyMask>
<Prompt></Prompt>
<Notify></Notify>
<Status></Status>
<CiscoIPPhoneFields>
<FieldType>0</FieldType>
<FieldAttr></FieldAttr>
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 10.0
299
Request Information from the Phone in XML