Cisco 9971 Administration Guide

Procedure
Step 1
In Cisco Unified Communications Manager Administration, select User Management > End User.
Step 2
Search for the user.
Step 3
Click the user ID link.
Step 4
Ensure that the user has a password and PIN configured.
Step 5
In the Permission Information section, ensure that the Groups list includes Standard CCM End Users.
Step 6
Select Save.
Customize the Self Care Portal Display
Most options display on the Self Care Portal. However, you must set the following options by using Enterprise
Parameters Configuration settings in Cisco Unified Communications Manager Administration:
•
Show Ring Settings
•
Show Line Label Settings
The settings apply to all Self Care Portal pages at your site.Note
Procedure
Step 1
In Cisco Unified Communications Manager Administration, select System > Enterprise Parameters.
Step 2
In the Self Care Portal area, set the Self Care Portal Default Server field.
Step 3
Enable or disable the parameters that the users can access in the portal.
Step 4
Select Save.
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager
10.0
100
Customize the Self Care Portal Display

Cisco 9971 Specifications

General

Resolution	640 x 480 pixels
Programmable Line Keys	5
Protocols	SIP, SCCP
Wi-Fi	802.11a/b/g
Weight	3.5 lbs
Display	5-inch color LCD
Audio	Wideband audio, G.722 codec support
USB Ports	2 x USB 2.0
Ethernet Ports	2
PoE	Yes (802.3af)
Video	H.264
Network Interfaces	10/100/1000 Ethernet
Codecs	G.711, G.722, G.729a, G.729ab, iLBC
Power Options	PoE
Headset Port	Dedicated headset port
Speakerphone	Full-duplex speakerphone